- 72mm long forged aluminum holder with hardware to fit most linear brakes - Replacement inserts include retention pins, fit most 72mm aluminum holders

Slip Avid's Rim Wrangler 2 Brake Pad Inserts into your Rim Wrangler 2 cartridges (sold separately) for excellent braking no matter the conditions. The easy-to-use cartridge design makes swapping pads a breeze. They're designed for use with linear-pull brakes.

Bolt on Avid's Rim Wrangler 2 Brake Pads for excellent stopping power. The cartridge design makes it easy to switch pads when they wear out. They're designed for use with linear-pull brakes.

Stiff, light and beautiful, Avid's Speed Dial 7 Brake Levers deliver excellent speed control and a great feel for your linear-pull or mechanical-disc brakes. And, they also feature adjustable reach for maximum hand comfort and are made to bend, not break, in the event of a crash. Plus, by turning Avid's Speed Dial knob, you can precisely tune the feel of your brakes any time without tools. This ambidextrous lever can be used as a front or rear lever, too.

Slip Avid's Shorty Brake Pad Inserts into your Shorty cartridges (sold separately) for excellent braking no matter the conditions. The easy-to-use cartridge design makes swapping pads a breeze.

To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

Clean up your control center with Avid's Matchmaker clamp. It combines the mounts for your SRAM shifters and Avid brake levers into one simple, sleek unit so you can drop some grams and keep your bar nice and tidy.

Clean up your handlebar with Avid's MatchMaker X clamp. It combines mounts for your SRAM shifters and Avid brake levers into one simple, sleek unit so you can shed grams and keep your bars nice and tidy. You can also integrate RockShox's XLoc remote (sold separately) for maximum convenience and ease of use.

• Replacement hoods for road brake levers with traditional, non-aero cable routing • Soft, tacky rubber for a sure grip • Available in black or brown

Add another braking option to your road or cross bars with Cane Creek's Cross Top Brake Levers. They are a great way to gain more control on technical cyclocross courses by enabling braking from the tops of the bars.

Electra's beautiful aluminum Ticino Cyclo-Tourist Bar End Brake Lever Set feature a throw-back style that will complement your vintage ride perfectly. They are specifically designed to work with Electra's Ticino Cyclo-Tourist handlebar (sold separately).

Jagwire's Road Pro Inserts (Campagnolo) are a nice upgrade for Campagnolo sidepull brakes. They're made of Jagwire's Pro Series compound in three versions for excellent stopping power in all conditions and with aluminum and carbon rims. Choose from Friction Fit and Click Fit for Campagnolo regular and Skeleton brakes respectively.

Jagwire's Mountain Sport Disc Brake Pads (Tektro) feature a low-noise, semi-metallic compound mounted to a steel backing plate for excellent braking performance and durability.

Jagwire Sport Semi-Metallic disc brake pads are a great improvement from OEM. They feature a high-performance semi-metallic compound that blends the low-noise of a resin pad with the durability of a metallic pad. Mounted to a steel backing plate, these are a great all-purpose pad.

The Dura Type insert pad was originally developed as an aftermarket upgrade for high end Shimano brake systems. The Kool-Stop Dura pads are the same spec as Shimano pads and fit Shimano, SRAM, TRP and Tektro holders with a set screw. Compounds: - Black: Kool-Stop's standard compound which is great for all weather conditions, but designed for dry condition riding. - Ceramic: This compound was designed for ceramic coated rims and is great in all weather conditions. - Salmon: Kool-Stop's most famous Salmon compound is also one of the most aggressive compounds for extreme all weather conditions especially in the wet, but still superb in the dry. - Carbon: Kool-Stop's original carbon compound which works great for most carbon wheels but will wear quicker on fast steep descents. - Dual: A fusion of Kool-Stop's two finest compounds which will give superb braking in all weather conditions. This combination produces a more controlled smooth stop! Features: - Patented Plow Tip - Water Grooves - Rim Friendly Compounds - Fits 55mm length holders

The Eagle 2 is a revolutionary pad that first utilized the hardened reinforced steel internal backbone. This larger pad has been used in all areas of cycling and is a good choice when frame, wheel and fork design allow. Features: - Hardened and Plated reinforced steel backbone - Patented Angled tip plow - Water grooves - Pad-Lock washer system - Available in Threaded and 2024 Aluminum Smooth Post Black: standard compound designed for dry condition riding Red: semi-aggressive compound for good performance Salmon: aggressive compound for extreme weather conditions Dual: combination of Salmon and Black compounds for more controlled, smoother stopping

- High performance compounds recommended for all-conditions - Steel backing

- High performance compounds recommended for all-conditions - Steel backing

- High performance compounds recommended for all-conditions - Steel backing

• Aluminum backing with extended cooling fins help regulate brake system temperature • High performance organic compound

One of the most important goals that Odyssey had when they sat down to work on new braking designs was to make the whole system easier to install (and remove) without sacrificing performance. They also wanted to be sure that every component would be very affordable. The Springfield brake drops the two ordinary (and confusing) brake springs and replaces them with one central spring that applies the same force to each arm, requiring no additional adjustment. This makes assembly incredibly easy–just bolt it on and go. The brake arms are designed to maximize stiffness and save weight without adding excessive cost. By die-casting the arms and using shared tooling to make each side, the Springfield meets all of the original design goals, resulting in a very powerful and affordable brake.

Origin-8's 54mm Pro-Force Lite brake pad inserts for Shimano and Campagnolo sidepull brakes features a 4-function surface for superior braking performance in all conditions. The front of the pads plows through contaminates on the rim, while the second section "primes" the rim surface and removes any moisture on wet days. Then, the large third section is centered on the bolt axis for uniform pressure and grip, and the fourth section is an anti-squeak compound that eliminates noise and the need to "toe-in" the pads.

Origin-8 Classic Linear-Pull Brakes are a great upgrade or replacement brake for your ride. Available in both front and rear, they feature forged aluminum construction with dual hex screw tension adjustment for simple set-up.

MisMatch adaptors allow users to mount Shimano & SRAM brakes and shifters on one clamp. Available in multiple configurations. -Annodized Black -Attaches SRAM shifters to Shimano I-Spec II brake lever clamps MisMatch 1.2 adaptor fits Shimano brakes: BL-M9020, BL-M9000, BL-M8000, BL-M7000

SRAM road disc brake pads are designed for use with SRAM road hydraulic disc brakes (HRD). - For use with Level Ultimate & Level TLM Brakes - Pad Material: Organic - Type: Road/CX - Includes guide pin, clip, & pad spreader

SRAM's Pad Inserts for carbon wheels are the perfect upgrade for your brakes to deliver excellent stopping power and speed modulation. The secret is SwissStop's proprietary yellow compound that resists heat buildup for a consistent grip without being "grabby." They have deep grooves to whisk away water so they're perfect for road and cyclocross alike.

Stainless steel rotor designed for smooth and quiet braking with any disc brake caliper.

Serfas' DBPA5 MTB Avid XO Trail Compatible Disc Brake Pads offer long-lasting, reliable braking. They're semi-metallic for durability and made for Avid XO Trail hydraulic brakes.

Shimano A01S Resin Disc Brake Pads - Fits XTR BR-M975/966/965, Saint BR-M800, XT BR-M776/775/765, SLX BR-M665/601, Deore BR-M596/595/585/545/535, Road BR-R505, Alfine BR-S501/500, LX BR-T665/605 calipers - OEM resin pad for XT BR-M775 and SLX BR-M665 calipers - Resin pad with low noise and excellent power modulation - Backing Plate Material: Steel - Compound: Resin - Heat Sink: No - Pad Shape Number: 20