Accessories

Lightship baskets are made from finely woven rattan cane, the outer skin of the natural rattan vine. These baskets are replicas of the Nantucket Lightship baskets first produced in Nantucket during the whaling era of the 1800s. Attaches to front handlebars with two leather straps. - Dimensions: 14" (L) x 10" (W) x 8.5" (H) - Maximum Weight Limit: 13 pounds

Swank XL enhances Tifosi’s classic model with a larger lens and fit. The oversized design of the Swank XL in Satin Vapor Polarized offers our signature sport features without compromising comfort or style. The hydrophilic rubber nosepieces provide a no-slip grip while the 100% UVA/UVB protected polycarbonate lenses offer scratch-resistance, assuring long-term use. - Frame: Light & Durable Grilamid TR-90 - Lens: Sky Blue Polarized – Shatterproof polycarbonate glare-reducing lenses with 100% UVA / UVB protection from harmful UV Rays - Features: Hydrophilic rubber nose pads that increase grip the more you sweat, Tifosi Glide technology allows the frame to slide on comfortably and provide an anti-bounce fit, & an integrated hinge that never pulls hair - Fit: Medium-XL | Weight: 26G - Included: Microfiber Cleaning Bag

The Banjo Brothers' Grocery Bag Pannier is sized to perfectly accommodate a standard grocery bag. It attaches to any standard rear rack (sold separately) and folds flat when not in use. It's equipped with a strong steel frame and a rigid polymer liner. The front and side panels are ripstop with ballistic fabric in high-wear areas. It also includes a shoulder strap and a quick-release mount. So ride to the store, take your pannier inside, fill it with groceries, and reattach it to your rack. Shopping = done.

Buzzy's Pollinator Travel Shock pump's compact size and removable 300 psi gauge make it is the perfect choice for mechanics on the go.

Turn your bike into an all-weather vehicle with Planet Bike's Hardcore Fenders. Made of unbreakable Superflex polycarbonate with stainless-steel stays, they're ultra tough. They boast mudflaps for the ultimate in splash and spray protection and the front fender has release tabs for easy on/off. Plus, the hardware is pre-installed for quick mounting.

Truing stand upright extensions install in seconds on any TS-2 or TS-2.2 Truing Stand, allowing the stand to be used on wheels with hubs up to 200mm wide (tandem, fat and downhill bikes), as well as on wheels with a 29-inch mountain bike tire installed*. In addition, specially sized bosses serve as adaptors so the stand can be used with wheels using thru-axle hubs with removable axles. Same features as the the TS-2EXT.2 with the addition of slots to secure rear drive e-bike wheels. * Note: TS-2.2 Truing Stand does not require these adaptors to accommodate 29-inch wheels but does require it to fit hub widths from 180mm to 200+mm.

Works with iPhone 6/6s/7/8. Clip in your iPhone to use as a cycling computer with apps, including the Topeak Panobike app, use it to navigate as a GPS device, listen to music, and much more while riding. The RideCase has a separate protective composite fiber panel which integrates with the high-grade engineering plastic exoskeleton to securely hold your iPhone while on the go. Its unique and full angle adjustable mount allows viewing in landscape or portrait orientation and lets you mount or remove the RideCase in seconds. - Material: Engineering grade plastic frame with composite fiber base plate / Machined aluminum - Added Features: Integrated flipstand for landscape or portrait viewing/Angle adjustable rotates for landscape or portrait viewing/Included mounts compatible with Topeak PanoComputer - Mount: Included mounts for installation on handlebar, stem or stem cap - Size: 14.1 x 7 x 1.6 cm / 5.6” x 2.8” x 0.6” - Weight: 27 grams

The Mag-Tank takes a new twist on top tube bags. Instead of a zippered opening, access to the bag is by a smartly contoured top flap held in place by a magnetic buckle with mechanical engagement (read - the magnet aids in closure, while load is placed on a connection). It will not unintentionally open and spill your gummy bears when you end up in the trees with your bike upside down like a conventional magnetic closure would. You can easily open the bag one handed by pulling outward on the cord loop and you have access to the whole top of the bag. To close, just flick the flap down and the buckle self-engages! The Mag-Tank is just a hair smaller than Revelate's Gas Tank to prevent leg movement from hitting the edge of the flap opening. Please note - while the cover to this bag is designed to shed rain and spray, due to the large panel opening it is not a sealed bag or waterproof bag. Features: - One-handed access while riding - Side panels stiffened with HDPE plastic sheets - Wrap around panel is padded with closed-cell foam - Interior lined with yellow fabric for greater visibility - Adjustable height daisy chain front attachment with a spacer block to clear stem clamp bolts - Beefy top tube strap has gripper material with double back wrap for bomber stability - Made in the USA with domestic and imported materials. Sizing: - Length: 8.5" - Max height: 5" - Width at stem: 2.5" - Tapers down to 2.5" tall and 1.5" wide along the top tube Specifications: - Weight: 4.5 oz. - Volume: Approximately 65 cubic inches - Materials: VX21 & 42 XPac, 420-denier yellow and red lining, closed-cell foam-padded tube sections, HDPE sheets

SRAM eTap Battery is the power source for the eTap system. The same power unit is interchangeable between front and rear derailleurs. - Up to 1000 kilometers of riding per charge - Weight: 24g - Finish: Black - Compatibility: SRAM RED eTap

- Easily attached with the use of the hook-on system. - Reflective details keep you visible in the dark. - Elasticated side pockets for water bottle and umbrella storage. - 18L

- Integrated top plate for quick-mount MTX 1.0, 2.0, and RX trunk bags - Integrated fender top - 6061 T6 alloy construction - To be mounted on bikes with disc brakes - 625g - 55lb weight capacity

Attachable shoulder strap for both the Norfolk Front Panniers and Suffolk Rear Panniers.

Take the lane with the confidence you're using the strongest tail light Blackburn's ever made. Featuring 3 focused LEDs, 270 degrees of visibility, and the 125-lumen BLITZ daytime running mode, the DAYBLAZER has all of your ride needs covered. Also, because of the narrow profile of the light and its unique mounting bracket, the DAYBLAZER 125 tail light can be mounted to just about anything you can think of from round or aero seatposts, to seat stays, to a rear rack, or your back pack. - Charging cable included, no tools required - Lithium-ion battery - Waterproof to IP-67 standard - TIR Lens - LED Fuel Gauge/Charge Indicator - Aluminum Construction - 3 hour recharge time - Runtime Solid: High 1.6hrs (120 lumen), Low 3 hrs (50 lumen) - Runtime Flash/Strobe: 3hrs (125 lumen)/6 hrs (65 lumen) - 78g

The Grid Side Light Set is designed to be mounted to either side of your fork and is spec'd with eye-catching amber-colored LEDs. Supported by a study by the National Highway Traffic Safety Administration (NHTSA) that showed 27% of bicycle accidents are side impacts and 30% of fatalities occur in intersections (between 2010-2017). Being seen from all angles while cycling has never been easier with this weather-proof, rechargeable Grid Side Light Set. - COB LEDS - Pack more LEDs in a small package with a powerfully even and wide light array to help you to be seen while riding in any environment. - ECO MODE - Extremely long run time in our Eco Mode for those riding all week, or on long daily rides. Eco Mode also extends the Pulse and Strobe modes by two hours. - USB-C - Modern USB plug standard to ensure you can stay charged and ready to ride - BATTERY GAUGE - Small color LEDs in the power button help you monitor your light battery power, to tell you when it's time to charge your light once more. Green = 100-50%, Orange = 50-25%, Red = 25-0% - MEETS ANSI FL-1 STANDARD - This standard was created by the American National Standards Institute (ANSI) to provide consistent performance measurements for handheld lights. - IP-65 - Ingress protection rating or 'IP rating', is a techy way to describe the level of water and dust proofness a product has. This light meets the IP-65 standard, which means is totally protected against dust/grit and is fully resist strong jets of water from all directions. - LIMITED LIFETIME WARRANTY - Restrictions and conditions apply.

Ideal for fast rides that require only the water on your back, the Katari 1.5 lets you carry the bare minimum. The high-quality, low-profile design features an included 1.5-liter reservoir that slides into its own exterior pocket with a bite valve that attaches magnetically to a sternum strap. A well-ventilated mesh harness offers exceptional airflow and rolled, soft-edge shoulders provide contoured comfort and stability. In the event you find yourself outside when the sun goes down, a loop for your rear tail light lets you be seen. Made with mountain bikers in mind, but practical for any activity where hydration is a must. LOW-PROFILE CARRY - When carrying water and a few essentials are all that's needed, the Katari/Kitsuma provides a lightweight option that rides close to your back for stability on any trail. RESERVOIR INCLUDED - An Osprey Hydraulics LT 1.5L or 2.5L reservoir keeps you hydrated all day long and stores in an external hydration compartment to protect pack contents from accidental spills. RIDE STABILITY - Our rolled, soft-edged harness contours to the upper shoulders to keep the pack close to your body and provide stability. AIRSCAPE SUSPENSION - Atilon foam framesheet allows dynamic body movement and distributes load across entire backpanel AIRSCAPE BACKPANEL - Ridged airmesh-covered foam with center air channel for excellent ventilation BIOSTRETCH HARNESS - Lightweight, ridged airmesh harness provides ventilated comfort - Rolled, soft-edged harness designed to contour the shoulder providing comfort and stability - Low-profile design with AirScape backpanel and rolled, soft-edged harness for maximum comfort - Dedicated hydration compartment with included Osprey Hydraulics LT 1.5L reservoir by Hydrapak - Magnetic sternum-strap bite-valve attachment - Zippered, scratch-free heat-embossed slash pocket - Loop for blinky-light attachment (light not included)

Sporting a fit made for those who take full advantage of life, Swick is vying to be part of your adventure. Call it sweet. Call it sick. It’s Swick. - Frame: Light & Durable Grilamid TR-90 - Lens: Smoke Polarized – Shatterproof glare-reducing polycarbonate lenses with 100% UVA / UVB protection from UV Rays - Features: Integrated hinge never pulls hair, hydrophilic nose pads for increased gripping, and Tifosi Glide technology allows the frame to slide on comfortably and provide a no-slip fit - Fit: Medium-XL | Weight: 26G - Included: Microfiber Cleaning Bag

Lezyne's Micro Floor Drive HP is a powerful mini-pump that thinks it's a floor pump. Its fold-out foot peg and aluminum construction make it easier than ever to pump up to a maximum pressure of 160 psi. You'll appreciate the ergonomic handle, extra-long hose and Presta/Schrader-valve compatibility. A frame mount and Speed Chuck is included, too.

Grip and rip with Lezyne's Shock Drive portable shock pump. With a full CNC-machined aluminum body, tough composite gauge, and palm-sized ergonomic handle, you can pump reps with Schwarzenegger pep till your shock's content. The zero-loss chuck ensures accurate ride pressures up to 400 psi, and its light weight and durability make it great for trail or shop use.

From the downhill mountain biker to the farsighted cyclists, the Padrone is ideal for anyone who wants to enjoy a squint-free ride and a fast, simple set-up. - Analog wireless - Large display and sleek design - Auto start/stop - Menu screen to change setting - ClickTec button interface - Programmable odometer - Battery indicator - FlexTight universal bracket

The name says it all… It holds tight and works with almost every smartphone having a 4.5” to 5.5” screen with or without a case. High quality, ultra-elastic silicone grippers tenaciously hold your phone for convenient display. The included strap mount rotates for portrait or landscape orientation. The Omni RideCase is compatible with other RideCase QuickClick mounts, like the RideCase CarMount or RideCase Armband. - Material: Ultra-elastic silicone/engineering grade plastic - Added Features: Angle adjustable Rotates for landscape or portrait viewing Included mount compatible with Topeak RideCase & PanoComp X - Mount: Included strap mount for installation on handlebar or stem - Weight: 26 grams (Case) - Size: 13.1 x 6.9 x 1.7 cm / 5.2” x 2.7” x 0.7” (Case)

Whether you're heading to the beach, riding to the grocery store, or just cruisin' around, Nantucket's Cisco Pannier Basket will get you and all your goodies there in style. This beautiful rattan basket boasts high-quality wicker construction and a rolled rim for extra durability. Plus, it attaches to most rear racks (sold separately) with a pair of easy-to-use metal hooks and includes a carry handle for portability. - Dimensions: 13" (L) x 9.5" (W) x 13" (H) - Maximum Weight Limit: 15 pounds or rear rack limit

These easy-to-use pannier baskets attach to your existing rear rack with two metal hooks and feature a carrying handle, making them perfect for a trip to the farmers market. Tuckernuck baskets are made from the highest quality natural rattan fibers. Woven from kubu rattan, the extra thick full-core weave of this basket makes it one of the most durable bicycle baskets on the market. - Dimensions: 13" (L) x 9.5" (W) x 13" (H) - Maximum Weight Limit: 15 pounds or rear rack limit - Sold individually

Don't come back to your locked bike only to find a sad frame missing its wheels and saddle. ABUS's NutFix system protects wheels and seat posts against theft using a physical trick. Thieves don't know the trick, but you do, so you can open them with a standard wrench. - Includes quick release skewers and axle nuts, sold in pairs to secure both wheels. - Skewers length: 120mm front; 150mm rear (for 100mm and 135mm O.L.D.)

Repair essentials for the home mechanic. Kit includes: - BBe-1 External Bottom Bracket - CCI-1 Crank Cap Bolt Install/Removal Tool - CW-1 Chain Whip - PDL-1 Pedal Wrench - TRL-3 Tire Levers (x3) - CAT-2 Crank Arm Remover Tool - CNT-3 Chain Tool - ST-1 Spoke Wrench - CLT-2 Cassette Lockring Tool - TA-1 8mm Hex / 1/2-inch Ratchet Adapter - HW-8 8mm Hex Wrench - TW-1 T25 Torx Wrench - HWS-2 Hex Wrench Set (2, 2.5, 3, 4, 5, 6mm) - PK-1 Inner Tube Patch Kit

Sunlite's Gold Tec Disc Rack fits almost any disc brake-equipped bike with wheel sizes of 26-inch, 27-inch, and 700c. Made from lightweight tubular aluminum, the Disc Rack is durable enough for daily commutes and light enough for long tours. The top deck has a capacity of up to 50 pounds and side struts support rear panniers.

ABUS' Pro Tectic Frame Lock is good for quick errands in safe neighborhoods. Its extra-wide opening—2.48 inches wide and 4.25 inches high—locks your rear wheel, preventing your bike from rolling or being ridden, while accommodating a variety of tire/wheel sizes. The case, 8.5mm shackle, and supporting elements of the locking mechanism are all made of special temper-hardened steel. The locking mechanism is in the lock body, providing an easy connection to the 4960 accessory chains and cables (each sold separately), and letting you lock your bike to a fixed object. The 4960 can be mounted to the bike using either the cantilever brake-mount option or the spannband LH adapter for bikes without screw/bolt sockets. - Mechanism Type: Key - Diameter: 8.5 mm - Shackle Height: 108 mm - Shackle Width Inner: 6.3 cm - 2 keys are supplied with the lock

Wet weather is no worry when you've got Electra's Cruiser Essential Aluminum Fenders. They're made from durable, low-maintenance aluminum and offer full coverage so you'll arrive squeaky clean. All mounting hardware is included for quick and easy installation.

Add more utility to your Electra Townie with the Townie Alloy Rack. This aluminum rear rack features a sturdy design that attaches quickly and easily so you can bring along nearly anything your heart desires. The platform acts as a short fender, too.

- Machined Aluminum Bar plug tool kit - Hex bits: 2,3,4,5,6,8mm - Phillips bits - T10,T25,T30 - Fits all standard non-road handle bars

Add more utility to your Electra Cruiser with the Cruiser Classic Rack. This aluminum rear rack features a sturdy design and attaches quickly and easily so you can bring along nearly anything your heart desires.