Parts

- Prevents chain derailment when shifting to inner ring - Adjustable hose-type clamp fits 1-1/8" to 1-3/8" seat tubes

- 72mm long forged aluminum holder with hardware to fit most linear brakes - Replacement inserts include retention pins, fit most 72mm aluminum holders

Rubber Gecko is a cushy bar tape made with foam and an outer layer of natural rubber. Rubber Gecko offers a soft tactile grip with a bit of give to it. It wraps slightly fatter than our original gecko grip, but not by much. Perfect for the rainy, cold cobbled classics.

Gecko Grip is EVA foam and ventilated polyurethane in a laminated, layered construction. Gecko Grip has a rubbery, "grippy" feel compared to cork tape. It lays flat on the wrapped bars and is thinner than cork. It doesn't absorb sweat as easily as cork and can be wiped off with a wet rag in seconds.

Gecko Pave is a fabric and EVA foam base bar tape, topped with a layer of printed silicone. Applying a thin layer of silicone made it possible for us to produce a bar tape that is of similar weight to our Gecko Grip, while retaining the grippiness and overall feel of a pure silicone tape.

Art Gecko is our new grippy polyurethane rubber bar tape with a colorful artistic patter on the drops. This pattern is called a tri-color tessellation. When wrapped from the bottom it fades to black about where the brake levers mount. - Artistic pattern, 9 colorful choices - Color below the drops, black up top - Great feel, Polyurethane rubber surface - 220 cm rolls, plenty of length - Nice flat wrap - 92 grams including the plugs

Bolt on Avid's 20R Brake Pads for consistent, powerful braking. They're designed for use with linear-pull brakes.

Slip Avid's Rim Wrangler 2 Brake Pad Inserts into your Rim Wrangler 2 cartridges (sold separately) for excellent braking no matter the conditions. The easy-to-use cartridge design makes swapping pads a breeze. They're designed for use with linear-pull brakes.

The squeeze of our levers is what dreams are made of. Most of our levers can be swapped to be run either front or rear, which is convenient if you like to your brakes reversed and a Godsend if you bust a lever in the middle of the woods. Avid levers are easy to install, simple to set up, and a pleasure to pull. - ReachAdjustment -- Qwik-Adjust Barrel Adjuster Bend Zone

To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

Built around one of our original breakthrough designs, the Speed Dial 7 is the smooth and powerful way to control linear-pull or mechanical disc brakes. They are super easy to install and adjust so you can dial in the modulation just the way you like. - Compatible with mechanical disc brakes and linear-pull brakes. - Reach Adjust and Speed Dial Leverage Adjust - Reversible

- Includes stainless bolts - Fits 160mm front and 140mm rear rotors

To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

- Designed for street riding and dirt jumping - Compact design keeps it low and out of your way - 9mm rails handle the abuse of BMX riding - Composite frame protects saddle from abrasion - Use: BMX - Rail: Steel, 9mm - Cover Material: Emerald - Suspension: None - Size (LxW): 8.75 x 5"

- Cold-forged chromoly construction - 8 splines for removal - Oversize 3-pawl design - Heavy-duty use freewheel - 13T and 14T fit Flip-Flop hubs only - Speeds: Single - Width: 3/32"

Broooks Nylon Rain Cover protects your Leather Saddle from moisture. If a wet saddle is ridden not only the color may stain your clothing, but the leather top may easily deform. MEDIUM: for all road, mtb, trekking and touring saddles (Team Pro, B17,..). LARGE: for all city, transport and heavy duty saddles (B66, B33,..)

Padded, Hard-wearing, All-Surface Absorption. Cambium Rubber Bar Tape is suitable for cyclocross, gravel, or road and comfortable for cycle touring with extra padding to reduce road buzz and provide a more comfortable grip over rough surfaces. All-surface absorption Designed to absorb shocks and smooth out the ride. Comfortable to the touch The perfect material for a pleasing grip for natural comfort and complete control. Hard-wearing Made with wear and tear-resistant materials. - Comfortable to the touch - Hard-wearing - All-surface shock absorption

- Padded rubber tape with a tough, durable surface - Excellent grip in all weather conditions - Includes Brooks Rubber Bar End Plugs Specs: - Thickness: 3mm - Self Adhesive - Length: 215mm - Material: Cambium

The Cambium C67 is designed for the commuter, urban cyclist and casual tourer, perfect for E-bike, cargo bikes and Dutch-style bikes, or for anyone cycling in the upright riding position in all weathers. The Cambium C67 is designed with the commuter, urban cyclist and casual tourer in mind—a perfect saddle when cycling in all weathers in the upright riding position. A comfortable bike seat made from vulcanised natural rubber, the C67 moves with you for long-lasting comfort requiring no break-in period. Offering stability thanks to the wider rear part of the saddle, the curved shape and the flexibility of the rubber base, this saddle offers maximum control during acceleration (as with the E-bike) and to prevent backward sliding during the ride, while the fan structure in fibreglass nylon adds resistance against stress and vibrations. A rubber grip on the internal back plate guarantee a solid and stable grap. Durable and waterproof, the C67 utilises a nylon top for weather and abrasion resistance, making it the best bicycle saddle for E-bike, cargo bike and Dutch-style bikes. FEATURES: - Vulcanised Natural Rubber Saddle Top - Flexible and Robust Touring Surface - UV + Abrasion-Resistant Waterproof Nylon Top - Innovative Fan structure in Fibreglass-Reinforced Nylon - Nose-piece and Saddle Plate in Fibreglass-Reinforced Nylon - Rubber grip on the saddle plate - Metal Back Plate branding detail - Durable, Anodised Aluminium Rivets - Tubular Steel Rails

The Cambium C15 All Weather saddle is made for years of hard riding, in a forward riding position, for more sporty cycling. With the same contemporary design of the Brooks Cambium range, the All Weather is a durable and comfortable saddle that is “ready to ride”, thanks to a vulcanized natural rubber top for flexible performance requiring no breaking in period. From freezing rain to blazing sunshine, the waterproof, weatherproof nylon cover is made to perform flawlessly in all conditions. Additionally the updated fiberglass reinforced back plate has loops for a saddle bag or other accessory.

The Cambium C15 All Weather Carved is made for years of hard riding in a forward riding position, and features hole for pressure relief and additional flex, eliminating contact points which cause discomfort for some riders. With the same contemporary design of the Brooks Cambium range, the All Weather is a durable and comfortable saddle that is “ready to ride”, thanks to a vulcanized natural rubber top for flexible performance requiring no breaking in period. From freezing rain to blazing sunshine, the waterproof, weatherproof nylon cover is made to perform flawlessly in all conditions. Additionally the updated fiberglass reinforced back plate has loops for a saddle bag or other accessory.

The Cambium C17 All Weather is made for years of hard riding in an angled riding position, for commuting in the city or travelling the globe. With the same contemporary design of the Brooks Cambium range, the All Weather is a durable and comfortable saddle that is “ready to ride,” thanks to a vulcanized natural rubber top for flexible performance requiring no breaking in period. From freezing rain to blazing sunshine, the waterproof, weatherproof nylon cover is made to perform flawlessly in all conditions. Additionally the updated fiberglass reinforced back plate has loops for a saddle bag or other accessory.

The Cambium C17 All Weather Carved is made for years of hard riding in an angled riding position, and features a hole for pressure relief and additional flex, eliminating contact points which cause discomfort for some riders. With the same contemporary design of the Brooks Cambium range, the All Weather is a durable and comfortable saddle that is “ready to ride”, thanks to a vulcanized natural rubber top for flexible performance requiring no breaking in period. From freezing rain to blazing sunshine, the waterproof, weatherproof nylon cover is made to perform flawlessly in all conditions. Additionally the updated fiberglass reinforced back plate has loops for a saddle bag or other accessory.

Globally renowned and truly timeless, the B17 Standard is the saddle that secured Brooks' place in cycling history. It's been in constant production since 1910, providing cyclists around the world with over one hundred years of sublime support and unrivaled comfort. Each B17 Standard shapes itself to its rider, leading to a personal, customized saddle that fits like no other. And of course, it features Brooks' full grain, premium leather top secured by their trademark rivets for the ultimate in style, comfort, and durability.

With Versatile Contact Position drops that feature an 8-degree flare, 3-degree outsweep and 40mm tails, the CADEX AR Handlebar sets a new standard for all-road control. A 70mm reach and shallow 115mm drop make it easy to transition from the tops to the hoods and drops. And an innovative one-piece mold construction boosts strength and stiffness while still maintaining a best-in-class weight. - 8-degree flare and 3-degree out sweep provide total control over variable surfaces. - Extended 40mm tails on the drops add stability and leverage for increased confidence when sprinting or descending. - 3-degree backsweep delivers increased comfort and balance on the tops. - A 70mm reach and shallow 115mm drop allow quick and controlled transitions between the tops, the hoods and the drops. - One-piece, no-bond mold manufacturing process reduces weight and increases strength and stiffness. - Precision carbon fiber layup provides added strength at minimal weight. - Compatible with Shimano Di2 Bar End Type Junction.

Superlight weight for a competitive edge. Comfort to carry you through long training days and crushing queen stages. The all-new CADEX Race Handlebar features innovative one-piece construction and an ergonomic design that’s stiff, responsive and easy on your hands.

Campagnolo's Veloce 10-Speed chain boasts an anti-friction coating for a smooth, quiet drivetrain and outstanding durability. It's the perfect match for your Campy-endowed road machine.

For smooth shifting and a quiet drivetrain, pick up Campagnolo's Chorus 11-speed chain. It's unidirectional for unparalleled function and features lightweight hollow pins as well as an anti-friction treatment for shifting perfection. It also boasts excellent wear and flex resistance.

Compatible only with Record or Chorus square taper cranks. Features three cartridge bearings and a chromoly steel spindle. - 3 sealed cartridge bearings, 2 on the drive side, 1 on the non-drive side - Removable cups are machined from 7000 series aluminum - Unique taper is not compatible with Shimano - Weight: 220 grams

Steel sprockets with nickel-chromed finish. Built with one triplet and 8 single sprockets. - Includes lockring - 11-32t compatible only with medium-cage rear derailleur - Cassette Body Type: Campagnolo 10/11 Speed - Weight: 249g

• Replacement hoods for road brake levers with traditional, non-aero cable routing • Soft, tacky rubber for a sure grip • Available in black or brown

Cane Creek's Aheadset is a simple, affordable solution for your headset needs. • Bearing Type: Cup and Cone • Color: Black • Crown Race: 30 • Defined Color: Black • Lower Stack Height: 12 mm • S.H.I.S Lower: EC34 • S.H.I.S Upper: EC34 • S.H.I.S. Stem Clamp Diameter: 28.6 • Upper Stack Height: 18 mm • Weight: 165 g

Add another braking option to your road or cross bars with Cane Creek's Cross Top Brake Levers. They are a great way to gain more control on technical cyclocross courses by enabling braking from the tops of the bars.

Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 40-Series headsets. • Technical Description: ZS44/28.6/H8/K|ZS56/30/H4/K • Top Type: ZS - Zero Stack Cup • Top Head Tube Inside Dia.: 44.00mm • Stem Clamp Dia.: 28.6mm • Top Stack Height: 8mm • Top Bearing Type: Black Oxide, Sealed • Bottom Type: ZS - ZeroStack • Bottom Head Tube Inside Dia.: 55.95mm • Crown Race Seat Dia.: 20.015mm • Crown Race Type: Steel, Face-Sealed • Bottom Stack Height: 4mm • Bottom Bearing Type: Black Oxide, Sealed • Material: 6061 aluminum • Weight: 97g

Backed by a 110-year warranty and constructed in Fletcher, NC, the 110-Series headset is designed with no compromises in quality, durability, or finish quality. Zero stack uppers press into head tube with very little stack height. Lowers are either zero stack or external cup. - Sealed stainless steel bearings - Carbon-friendy compression ring captured in top cover, keeping shims in place - 7075 T-6 aluminum cups machined in Fletcher, NC - Aluminum dual seal crown race protects lower bearing - Interlok spacer compatible - 110 year warrranty - Compatible with tapered 1-1/8" to 1-1/2" steerer tubes, or straight 1-1/8" steerers with a conversion crown race (sold separately)

Due to its unique optimization treatment, CeramicSpeed's Ultrafast Racing Chain saves you watts and improves your performance with free speed and unparalleled low friction. Our ultrafast racing chains are carefully selected from high quality suppliers and optimized by hand in Denmark. This ultrafast chain has been optimized for KMC 11-speed compatibility, to boost the efficiency of your entire drivetrain. CeramicSpeed UFO Racing Chains can save you between 2–5 watts on a distance of 600 km/370 miles. Apply CeramicSpeed UFO Drip after 600km to maintain your peak chain optimization over the life of the chain. Be aware that the UFO treatment is not optimized for wet and muddy conditions, which might cause corrosion on the chain. CeramicSpeed uses chains from high-end brands to which an optimization treatment is applied. The CeramicSpeed UFO Chains go through a multi-step process, which involves polishing, cleaning, and application of two layers of treatment to achieve the most efficient chain possible. The UltraFast Optimization process is not highly technical, but it is very time consuming. In The Box: - 116 link Optimized Chain - Quick Link - Single Use UFO Drip sample - Disposable Gloves - Sticker Sheet

The new SRAM DUB crank standard, built on a 28.99mm spindle, allows for a more contamination-resistant BB design while retaining the ultra-efficient & long-lasting qualities CeramicSpeed Bottom Brackets are known for. With an integrated dust cover for all models, the snug & secure fit not only fully protects the face of the bearing, but also delivers exceptional performance without any sacrifices. CeramicSpeed hand-built bearings carry the load from crank to frame with unparalleled durability & efficiency. The SRAM DUB crank spindle requires the bearing contact points to be in a set and designated width, and all CeramicSpeed bottom Bracket options perfectly match the bearing placement on the crank spindle with the required frame interface for nearly any model of bike. Without the use of unnecessary adapters or spacers, a quiet & stable platform is ensured throughout the life of the product. The PF30 for SRAM DUB Road comes in two versions. One version uses our low-drag, long-life Standard Bearing with hardened-steel races and our super-round CeramicSpeed balls. The second version uses our Coated Bearing, which uses those same balls installed on coated, hardened-steel races for longer life and less bearing drag. Compatible with: - Frame: PF30 - Opening diameter: 46mm - Shell width: 68mm In the box: - 2 cups with CeramicSpeed Bearings installed - 2 dust covers - Spacer-tube - 4 x 1mm spacers - 10ml syringe of CeramicSpeed All Round Grease - Sticker sheet

- Developed specifically for gravel and mixed surface abuse, Grind Tape's unique, high-density rubber-based compound is made to withstand all weather conditions while offering enhanced grip and improved control via vibration and shock absorption. - Multi-layer, multi-density foam laminates effectively absorbs shock, dampens vibration and minimizes fatigue. - GEL padded adhesive keeps tape firmly wrapped on the handlebar and prevents residue for easy installation. - Reusable, expanding locking bar plugs are reliable and resistance to falling out. - Highly elastic finishing tape does not deform, degrade of soften in extreme temperature and weather conditions.

- Uniquely formulated synthetic leather with a “Aurora Image" pattern design for anti-slip and excellent handling performance. - Multi-layer, multi-density foam laminates effectively abosrbs shock, dampens vibration and minimizes fatigue - Highly elastic and lightweight organic adhesive will not leave residue on the handlebars to ease installation and adjustment - Reusable, expanding locking bar plugs are reliable and resistance to falling out - Highly elastic finishing tape does not deform, degrade of soften in extreme temperature and weather conditions

- Polyurethane layer is anti-slip with high tensile strength for long-term performance - Availabe in new metallic colors to add even more style and personalization to your bike - GEL is vibration damping and shock absorbing to minimize fatigue and strain due to real-world riding conditions - Reliable and reusable Lock-In bar end plugs

- Polyurethane layer is anti-slip with high tensile strength for long-term performance - Availabe in new graduated color fades to add even more style and personalization to your bike - GEL is vibration damping and shock absorbing to minimize fatigue and strain due to real-world riding conditions - Reliable and reusable Lock-In bar end plugs

- Uniquely formulated synthetic leather with Chameleon series colorway on the iridescent textures of the drops blend into the sleek, satin black, leather-like finish of the tops for a look that exudes speed and character and for superb grip and handling performance - Multi-layer, multi-density foam improves shock absorption while dampening vibration to effectively minimize fatigue - Highly elastic and lightweight organic adhesive will not leave residue on the handlebars to ease installation and adjustment - Reusable, expanding locking bar plugs are reliable and resistance to falling out - Highly elastic finishing tape does not deform, degrade or soften in extreme temperature and weather conditions

- Uniquely formulated synthetic leather with rainforest inspired graphic texture for superb grip and handling performance - Multi-layer, multi-density foam laminates effectively absorbs shock, dampens vibration and minimizes fatigue - Highly elastic and lightweight organic adhesive will not leave residue on the handlebars to ease installation and adjustment - Reusable, expanding locking bar plugs are reliable and resistance to falling out - Highly elastic finishing tape does not deform, degrade of soften in extreme temperature and weather conditions

Protect the soles of your shoes with the Shoe Shields from Crank Brothers. These stainless-steel plates install under your cleats and prevent the pedal from digging in to your carbon-soled shoes. - Sold in pairs

Cleats with a more forgiving 10-deg release. - Optimized for novice riders or those new to clip-in pedals - 10-deg release angle makes it easier to unclip - 2-hole bolt pattern for mountain bike shoes - Plastic spacing shims included - Compatible with all Crankbrothers clip-in pedals

Crank Brothers' Premium MTB Cleats are perfect for your Crank Brothers Eggbeater, Candy, Acid, Smarty, Mallet, and Quattro pedals. They're made from solid brass for crisp entry and exit, and top-notch durability. - SPD compatibility - Weight (pair): 30g - Float: 6 degrees - Release angle: 15 or 20 degrees

Crank Brothers' Zero Float Cleats offer no pedal float for greater pedaling efficiency. They're made from solid brass for crisp entry and exit, and top-notch durability. - Weight (pair): 30 grams - Shoe compatibility: SPD - Release angle: 15 degrees

Crank Brothers' Quattro 3-hole cleats let you use Crank Bros. pedals with your road shoes. The cleat and walking plate mount directly to shoes that use a traditional 3-hole mounting setup.

Size specific composite platform pedal with optimal shoe/pedal interface. - Optimal surface area - Minimal profile 13mm thin - 9 hex traction pins per side - Premium bearings & seal system - Stamp large recommended for shoe sizes: 10-15 (us) // 43-49 (eu) - Body Material: Composite - Footprint: 111mm x 114mm - Hex Traction Pins: 9 per side (mounted from back) - Inner Bearing Type: Igus LL-glide bearing - Outer Bearing Type: Enduro cartridge bearing - Shoe Size: 10-15 (us) // 43-49 (eu) - Spindle Material: Forged scm 435 chromoly steel - Warranty: 5 years - Weight: 329g per pair

Size specific composite platform pedal with optimal shoe/pedal interface. - Optimal surface area - Minimal profile 13mm thin - 9 hex traction pins per side - Premium bearings & seal system - Stamp large recommended for shoe sizes: 10-15 (us) // 43-49 (eu) - Body Material: Composite - Footprint: 111mm x 114mm - Hex Traction pins: 9 per side (mounted from back) - Inner Bearing type: Igus LL-glide bearing - Outer Bearing type: Enduro cartridge bearing - Spindle Material: Forged scm 435 chromoly steel - Warranty: 5 years - Weight: 329g per pair

Size specific composite platform pedal with optimal shoe/pedal interface. - Optimal surface area - Minimal profile 13mm thin - 9 hex traction pins per side - Premium bearings & seal system - Stamp small recommended for shoe sizes: 5-10 (us) // 37-43 (eu) - Body Material: Composite - Footprint: 111mm x 114mm - Hex Traction Pins: 9 per side (mounted from back) - Inner Bearing Type: Igus LL-glide bearing - Outer Bearing Type: Enduro cartridge bearing - Shoe Size: US 5-10 // EU 37-43 - Spindle Material: Forged scm 435 chromoly steel - Warranty: 5 years - Weight: 329g per pair

Size specific composite platform pedal with optimal shoe/pedal interface. - Optimal surface area - Minimal profile 13mm thin - 9 hex traction pins per side - Premium bearings & seal system - Stamp small recommended for shoe sizes: 5-10 (us) // 37-43 (eu) - Body Material: Composite - Footprint: 100mm x 100mm - Hex Traction Pins: 9 per side (mounted from back) - Inner Bearing Type: Igus LL-glide bearing - Outer Bearing Type: Enduro cartridge bearing - Shoe Size: US 5-10 // EU 37-43 - Spindle Material: Forged scm 435 chromoly steel - Warranty: 5 years - Weight: 299g per pair

Choose to ride flat or clipped in for city commutes and casual rides around town. This hybrid composite pedal with its 2-sided entry allows you to do both. It features premium bearings and a double seal system, diamond plate pads for traction, and molded pins and ribs for grip. - Premium brass cleats with shims included - Q-factor: 57mm - Release angle: 15° / 20° - Forged 435 Chromoly steel spindle - 300 series stainless steel spring - 5-year warranty - 331g per pair

Crank Brothers' Eggbeaters are 4-sided, which makes them super easy to enter and exit. Their open design makes them shed mud and debris quickly, and these pedals feature 6-degrees of knee-friendly float. The Eggbeater 1s feature chromoly axles, stainless-steel springs, and steel bodies.

Crank Brothers' most versatile pedal. The Candy excels at it all—cyclocross, XC, trail, and all mountain. 4-sided entry enables superior mud-shedding capability, and customizable float and release angles create a dialed-in feel. Specs: - Spindle material: Forged scm 435 chromoly steel - Body material: 6061-T6 aluminum - Wing material: Stamped steel - Spring material: 300 series stainless steel - Release angle: 15° / 20° - Q-factor: 52mm - Inner bearing type: Igus LL-glide bearing - Outer bearing type: Enduro cartridge bearing - Cleat: Premium brass cleats with shims included - Weight: 355g per pair - Warranty: 5 years

Crank Brothers' Candy 3 pedals combine 4-sided cages for super-easy entry/exit with CNC'd aluminum platforms for low weight, great foot stability, and on-trail durability. The Candy 3s feature chromoly axles, stainless steel springs, CNC machined aluminum wings, and an open design that sheds mud fast, making them ideal for sloppy conditions and cyclocross. They're also enhanced with inner needle bearings and water-tight internals for consistently smooth pedaling.

The ultimate pedal for enduro riding and racing, with a longer spindle. - Concave platform for secure foothold - 6 adjustable pins per side for grip - Integrated traction pad technology to optimize the shoe/pedal interface - Ribbed body for better traction when unclipped - Chamfered edges to reduce rock-strikes - 57mm q-factor for increased shoe clearance and control - 4-sided entry / superior mud shedding - Customizable float & release angle - Premium bearings & double seal system - Adjustable Pins: 6 per side - Body Material: 6061-T6 aluminum - Cleats: Premium brass cleats with shims included - Endcap: Hex alloy - Inner Bearing Type: Igus LL-glide bearing - Max Rider Weight: No restriction - Outer Bearing Type: Enduro cartridge bearing - Q-factor: 57mm - Release Angle: 15° / 20° - Spindle Material: Forged scm 435 chromoly steel - Spring Material: 300 series stainless steel - Warranty: 5 years - Weight: 424g per pair - Wing Material: 17-4PH stainless

Bearings for maintaining and rebuilding DT Swiss hubs. - DT Swiss 6902 Bearing

The Knuckleduster features a tapered internal sleeve that you have to tap onto your handlebar for full engagement. This tapered sleeve feels like it is already locked into place once fully tapped onto the bar and coupled with a single bolt lock-on clamp, you will not develop any play. The body of the grip combines the best elements of a half-waffle, mushroom ribbing, and an ergo feel. Featuring a mushroom pattern to minimize vibration. The Knuckleduster grips are an all day grip that allow you to keep it Pinned Wide Open at all times.