The Jandd Helmet Cover offers protection from the elements. - 3M Reflective Tape is sewn to the front and back, additionally the back has a loop for a high-visibility flashing light - Made with 200 Nylon Oxford with a laminated urethane layer, heat sealed seams and sew holes - Fits most bike helmets and keeps water from penetrating - NOTE: One size does not fit all, this cover is intended for standard helmets without a visor
- Made in the USA - Enables Take a Look Original Eyeglass Mirror to fit helmets - Does not work with Take a Look Compact Eyeglass Mirror
This helmet mount works with all CatEye Lights. Pair it with the Volt 800 for the ultimate trail solution.
When chilly, soggy weather rolls through, Garneau's H2 Helmet Cover keeps you both warm and dry. It's made from a polyurethane-coated spandex that's water resistant. The sealed seams and a snug stretch band that fits easily over your helmet also keep water from seeping in. Plus, when the sun's not shining, the high-visibility yellow color and reflective accents will help make you visible to others.
Water-resistant stretchable cover that can be pulled on as the elements demand its use. - Waterproof shell - Fits over helmet - Reflective accents for visibility
Replacement visor for Kask's Bambino Pro TT helmet.
Replacement pads for Kask's Mojito helmet.
- Protextura Plus fabric for water-proof protection while maintaining high breathability - Designed to fit most helmets - Reflective trim and bright yellow color enhances visibility in low light or foggy conditions - Drawcord in the hem helps fit a wide variety of helmet shapes
No two heads are exactly the same. Give your Nutcase Metroride helmet an exact custom fit with removable and versatile foam pads in three different sizing sets. Comes in 3mm, 6mm and 9mm thicknesses.
Keep your ears nice and toasty. Nutcase's removable ear pads provide comfort and warmth on those brisk and chilly rides. Compatible with Nutcase Street (Bike & Skate) and Little Nutty lines only. Not compatible with Metroride, Baby Nutty, Moto, Snow, or Water.
No two heads are exactly the same. Give your Nutcase Gen3 Street helmet an exact custom fit with removable and versatile foam pads in three different sizing sets. Comes in 3mm, 6mm, and 9mm thicknesses. Crown pad is 3mm thick. Please note: This pad set is meant as a replacement for worn out pads, and does not need to be purchased with new helmets. All Gen3 Small & Medium helmets come with one set of 3mm & one set of 6mm pads; Large comes with those two sets and the additional 9mm back pad.
To protect against bright sunlight and light rain, the Nutcase removable visor shades, shields and protects. Made from soft flexible rubber with a hard rubber fin that fits between the ABS plastic outer shell and EPS foam liner, the visor is perfect for unpredictable weather and sunny days alike. Visors are compatible with Street and Little Nutty helmets only, and will not fit with Metroride, Baby Nutty, Moto, Snow, or Water.
Looking for a great around town lighting system at a very reasonable price? The Duplex is just that. Providing both headlight and rear light in one unit, the Duplex easily mounts to your helmet with an included rubber strap and provides up to 100 hours of run time on only two AAA batteries. The light is easy to operate and can be switched between constant beam and flashing modes simply by pressing and holding a button. Making yourself visible in city traffic can help motorists see you better, and a good helmet-mounted light that is worn on your head, up and away from the distraction of car lights, can really make you stand out in a sea of vehicles. Use your head, and use a light. Features - Dimensions: 70.5 x 28.5 x 23 mm - Weight: 51.5 g (with bracket and batteries) - Light source: White LED x1, Red LED x1 - Battery: AAA alkaline battery x2 - Mount: Rubber band (Long) Modes/Run Time - (Front) Constant mode (15 lumens): 100hrs - (Rear) Constant mode (10 lumens): 100hrs - (Front) Flashing mode (30 lumens): 100hrs - (Rear) Flashing mode (10 lumens): 100hrs
Taking the ultimate helmet lighting system – the Vis 360 – to the next level, the Vis Pro features an ultra-powerful 600-lumen headlight optimized for commuting and bright enough for twisty singletrack! The featherweight system is waterproof for all-conditions reliability and has an integrated rear light/battery pack that balances the unit on a variety of helmets. An essential setup for those requiring maximum protective visibility with powerful illumination. Featuring: - 600 Lumen Output Certified to the FL-1 Standard - Daylight Visible Pulse Mode - Integrated Battery Pack With Red Rear Lighting - Innovative Amber Sidelights Provides Critical Side Visibility at Intersections - Ultra-lightweight Setup With Easy Clip On/Off Design - Waterproof to 1 meter For All-Conditions Reliability - Accurate Battery Charge & Status Indicator - Micro USB Rechargeable Included: - Helmet Mounts & Micro USB Charging Cable
PWR Helmet/GoPro Mount - for holding charger and modular lights on top of helmet (Excludes PWR Mountain). Tri-prong system works with GoPro, so can be used to mount lights under Garmin and other mounts. - Compatibility: Works with PWR Charge and Modular lights (not PWR Mountain) - Mounting system: Designed to fit most vented helmets, common for road and trail cycling and is GoPro compatible - T Slot (For modular): Allows for quick release of the light when parking your bike - Weight: 20g
The Asteroid fits all new and older Bern helmets with a two-hole mount located in the rear of the shell. USB rechargeable. - 12 Lumens - Micro USB rechargeable - 3 Light Modes (Flash 24 hours, Pulse 6.5 hours, Steady 5.5 hours) - Water Resistant - 16 grams - 26mm tall, 39mm wide, 20mm thick (w/o bracket)
The Aeroshell is a plastic cover designed to fit perfectly over specific models of Lazer helmets. The Aeroshell snaps into place and protects the rider's head from wind and rain while still allowing for some air movement under the front of the helmet and out the rear vents. The Aeroshell is unique in that it is easily removed from the helmet when riding conditions are such that additional ventilation is desired. Snap it on when the rain is pouring down and pull it off when the sun starts to shine—the Aeroshell is the perfect tool for every possible condition. Additionally, the Aeroshell provides a significant increase in aerodynamic performance once it is installed on the helmet. By closing off the ventilation holes, the amount of aerodynamic drag the helmet creates is strongly reduced, making your road helmet into an aero helmet and resulting in a faster ride. - Fits Lazer's Tardiz helmets only
- Mud and splash protected - Foam padding for additional protection - Simple to access - Can be attached to backpack
- Mud and splash protected - Foam padding for additional protection - Simple to access - Can be attached to back pack
Page 1 of 1