Accessories

Rugged Protection For Dirty Days On Your Mountain Bike Endura was among the first to employ neoprene in bike overshoes. A core stalwart of our collection, the MT500 Overshoe has been a best-seller for many years. Here in Scotland, we know a thing or two about foul weather gear, and this latest evolution of our waterproof durable mountain bike overshoe is the result of years of testing in the worst possible conditions. Endura’s unique molded rubber toe cap with a treaded underside provides grip when climbing steep and muddy slopes. The stand-out feature of Endura's MT500 Overshoe, and the one that sets it apart from the rest of the competition, is the molded rubber toe cap. This has been totally revamped with improved tread on the underside that gives you plenty of grip on steep, muddy slopes and also includes additional reinforced areas that improve the durability of the overshoe. Neoprene is the perfect material to construct overshoes from. Not only does it provide water and wind protection but it also adds an insulating layer over your foot. This keeps your circulation going allowing you to ride for longer in comfort, whatever the weather. - Tough nylon-faced neoprene upper - Offset rear zip with snap-down puller and zip guard - Molded rubber toe cap with treaded underside to help climb steep muddy slopes - Asymmetric front seam for improved fit - Hard-wearing reinforced sole protects the bottom of the overshoe from rocks and pedals - Crank-rub protection - Reflective detailing - Suitable for MTB cleats only - 90-day Satisfaction Guarantee

Best-Selling Waterproof Neoprene Overshoe That Insulates And Protects Your Feet From The Rain And Cold—Universally Loved By Roadies Worldwide. Endura was the first to employ neoprene in bike overshoes. Not wanting to rest on our laurels, we have revamped our core road overshoe with several new features to keep it one step ahead of the competition. A core stalwart of our collection, the neoprene Road Overshoe has been a best-seller in our range for many years. Here in Scotland, we know a thing or two about wet weather gear and this waterproof durable overshoe is the result of years of testing in the worst possible conditions. Comfort was a key consideration when updating the Road Overshoe. To improve pedaling comfort, the decision was taken to off-set the rear zip, moving it away from the flex point behind your ankle reducing the chance of it digging in. Smooth neoprene outer face creates a surface that water naturally runs off, keeping your feet warm and dry inside. A durable sole with cleat access points stitched with a bulletproof aramid thread that extends the lifespan of our product beyond more flimsy alternatives on the market. - Smooth neoprene construction and welded asymmetric seam give super-smooth styling and waterproofing - Offset rear zip with snap-down puller and zip guard - Crank-rub protection print - Reflective rear zip tape - Hard-wearing stitching using aramid thread

- Stretch waterproof PU fabric with taped center front seam - Extensive 360-degree reflective trim on front, side, and rear - Flatlocked seams for additional durability - Opens fully at sole and up back heel with Velcro fastening for an adjustable fit - Stretch aramid abrasion resistant sole and toe - Suitable for all kinds of footwear and cleats

An essential accessory for any level of rider, these leg warmers transform your shorts into much warmer full-length tights. Our latest warmers feature a new, softer Thermal fleece fabric with improved stretch, which makes both fit and comfort exceptional. But, our PI Dry technology is what really sets these warmers apart, offering permanent water-shedding performance for puddle-charging splash resistance and more warmth in wet conditions. A BioViz logo on the back of the calf adds reflectivity in low-light conditions. - Thermal fleece fabric with water-shedding PI Dry technology for all-weather performance - Anatomic construction eliminates bunching through your full range of motion - Plush, wide elastic binding with silicone gripper for a stay-up fit - BioViz reflective elements for low-light visibility - Zippered ankle for easy on-and-off - 56% recycled nylon, 30% polyester, 14% Lycra elastane - Made in Vietnam

Use these easy-to-slip-on covers over your treaded MTB shoes to keep your feet warm and dry in the sloppiest riding conditions. - P.R.O. Barrier WxB fabric provides optimal wind and water protection - Fleece lined interior for warmth - Waterproof, taped external seams - Second generation two stage hook and loop closure provides both sleek fit and easy on and off - Durable Kevlar bottom holds up to trail use - Synthetic leather toe bumper adds scuff protection - Bottom is designed to fit treaded MTB style shoes - BioViz high visibility colors and reflective elements

When the conditions get wet, keep pedaling with warm and dry feet in these easy-to-slip-on, wind- and water-protective covers. - P.R.O. Barrier WxB fabric provides optimal wind and water protection - Fleece lined interior for warmth - Waterproof, taped external seams - Second generation two stage hook and loop closure provides both sleek fit and easy on and off - Durable rubber toe area provides superior traction on wet surfaces - For road shoes with external cleats - BioViz high visibility colors and reflective elements

Lightweight and elastic thermal bike leg warmer with softly brushed inside for enhanced comfort and thermoregulation. Smooth, lightweight and elastic fabric for freedom of movement. Ergonomically placed seams in contrast colors, follow the moving body. Elastic silicone grippers keep the leg warmers in place. - Smooth, lightweight and elastic fabric for freedom of movement - Elastic silicone grippers keep the leg warmers in place - Ergonomically placed seams in contrasting colors, follow the moving body - Softly brushed inside for enhanced comfort and thermoregulation - Fabric: 87% Polyester, 13% Elastan

Shuttling to the top of your descent isn't always an option, and besides, sometimes it's nice to earn it. The Enduro Elbow Sleeves are lightweight and breathable for maximum comfort. They allow full range of motion thanks to a high-stretch rear panel. - Slip-on design - Perforated neoprene on the outside of the arm & stretch material on the back - Multi-fabric design fits perfectly, keeps you cool & dry and prevents slipping

For cold and blustery mornings with a chance of rain, Diversion Arm Warmers give you a lightweight, water repellent and wind resistant solution easily stashed in your jersey if things warm up. Constructed with an aerodynamic 3D ergonomic cut using water repellent and wind proof ProTextura 4-way stretch fabric, silicone gel grippers keep them secure while reflective detailing offers improved visibility in low light conditions. An essential for any cyclist's locker in changeable spring and autumn conditions, team them up with the Giant Diversion Short Sleeve Jersey for the ultimate cycling outer layer. Features - ProTextura fabric is waterproof, windproof and highly breathable in key exposure areas - ThermTextura fabric on the inside keeps you warm while wicking moisture to keep you dry - 3D ergonomic fit - Silicone gel gripper - Reflective accents

Liv's Mid-Thermal Knee Warmers are great for cool days and variable weather conditions. Made from fleece-lined ThermTextura fabric that protects you from the elements, these warmers also feature flatlock seams that provide amazing next-to-skin comfort. The race fit means they'll stay secure against your legs, and they have reflective accents for enhanced visibility. - Liv RACE FIT - Flatlock seams - High-visibility reflective accents - ThermTextura fabric

Liv's Midthermal Arm Warmers are great for cold rides, breezy descents, and unexpected weather. They're made from warm and soft brushed fabric that transfers moisture, breathes easily, and dries quickly. Reflective details at the wrist offer enhanced visibility when rides go long and the light starts to recede. - Liv RACE FIT - Flatlock seams - High-visibility reflective accents - ThermTextura fabric

Transform any pair of cycling shorts into a knicker with these super-versatile knee warmers. A general rule is to keep knees covered up to 60 degrees, which means these warmers could see action all year long. Our latest warmers feature a new, softer Thermal fleece fabric with improved stretch, which makes both fit and comfort exceptional. But our PI Dry technology is what really sets these warmers apart, offering permanent water-shedding performance for more warmth in wet conditions. A BioViz logo on the back of the calf adds reflectivity in low-light conditions. - Thermal fleece fabric with water-shedding - PI Dry technology for all-weather performance made with anatomic construction eliminates bunching through your full range of motion - Plush, wide elastic binding with silicone gripper for a stay-up fit - Anatomic left- and right-specific fit - BioViz reflective elements for low-light visibility - Unisex sizing - 56% recycled nylon, 30% polyester, 14% Lycra elastane - Made in Vietnam

- Content: 55% Merino Wool, 45% Lycra/Nylon - Care: Machine wash cool. Tumble dry low. No bleach, softeners, or harsh detergents. - Maximum thigh circumference of 25 in (63.5 cm) The form-fitting Kneeker is designed to protect and warm the knee and quadricep when riding, covering from mid-thigh to mid-calf or in full length. How to wear the Kneeker: bunch up the Kneeker and use both hands to pull it up to the knee. Then pull the top up to overlap with bib shorts, pulling the bib shorts over the Kneeker at the top of the thigh. For the full length Kneeker, pull the bottom down to overlap with socks. If the Kneeker is sliding down, it means there's north south tension pulling from the bottom of the Kneeker; the Kneeker should only have east west tension. This will keep it from pulling down. The overlap of the bib shorts holds the Kneeker in place. 55% Recycled Polyester, 45% Lycra/Nylon

- Wind-resistant/water-resistant - Insulation for warmth - Reflective logo

The problem with so many cycling caps is that they are too bulky to fit under most helmets. Ours reduces that bulk by using the same 18.5-micron Merino/polyester plated construction found in our base layers, so that it will fit under a helmet and wick moisture away as it regulates temperature. A flexible, durable insert in the bill ensures it will survive machine washing. - Transfer Merino fabric combines wool and recycled polyester for sustainable technical performance. - Unique plated fabric construction places polyester next to skin and merino on the exterior for superior moisture transfer and thermal regulation. - Made using fine 18.5-micron merino wool for superior comfort. - Recycled Repreve XS Polyester technical fibers are made from recycled plastic water bottles. - Cycling-specific bill provides sun protection without hindering visibility when in the drops. - BioViz reflective elements for low-light visibility. - Wool Blend Performance certified by the Woolmark Company to ensure the highest quality product.

Use Louis Garneau's Arm Coolers to reflect the sun's penetrating rays. Crafted from Garneau's IceTek polyester/spandex fabric treated with Xylitol, the sugar alcohol used as the cooling sensation in gum, these ultralight sleeves keep you cooler so you can go faster, longer. They also offer UPF 50 sun protection, silicone grippers for a secure fit, and reflective accents for enhanced visibility.

- Full wind protection in front - Protects your head in windy conditions - Lightweight Gore Windstopper fabric - Soft and close fit

For high altitude mountaineering and touring in extreme environments, the Wind Warrior Hat offers superior protection. Made of Gore Windstopper Technical Fleece with a full fleece lining for additional warmth, the Wind Warrior protects against harsh winter winds. Integrated Polartec WindPro ear panels improve hearing, ensuring you’ll always know straight away when your climbing partner is yelling, “TAKE!” - Gore Windstopper 3L 100% polyester microfleece crown and earband - Polartec Wind Pro 90% polyester - 10% spandex hard finish face with soft fleece backer earports - Radiant Fleece 95% polyester - 5% spandex lining - 2.5oz /71g Avg. Weight for size L/XL - Windproof, Wicking - Hybrid Mapped Construction - Contoured Earband - Four-Panel Crown Construction - Embroidered OR Logo - Back Stretch Panel Adjusts to Fit

Arm warmers are likely the most essential cool weather cycling accessory, and for much of year you won't leave home without them either on or in your pockets. Our latest warmers feature a new, softer Thermal fleece fabric with improved stretch, which makes both fit and comfort exceptional. But our PI Dry technology is what really sets these warmers apart, offering permanent water-shedding performance for more warmth in damp conditions. A BioViz logo near the elbow adds reflectivity in low-light conditions. - Thermal fleece fabric with water-shedding PI Dry technology for all-weather performance - Anatomic left- and right-specific fit - Plush, wide elastic binding with silicone gripper for a stay-up fit - BioViz reflective elements for low-light visibility - Unisex sizing - 56% recycled nylon, 30% polyester, 14% Lycra elastane - Imported

Nothing beats the all-around protection of a winter cycling cap. Not only does this piece keep your head and ears warm, but the bill forms a seal over your glasses to shield your eyes from wind and rain. This cold-weather essential is built with thermal fabric that balances insulation with breathability. It fits comfortably under a helmet and a port in the rear allows ponytails to pass through. FEATURES: - Pedal to Zero™: Going by bike 4mi / 6km offsets the climate impact of this garment - Made with recycled materials - Fits easily under a helmet - Protects ears from cold - Shields eyes from wind and rain - Rear port for ponytails FABRIC: - 79% recycled polyester, 21% spandex

Keep your arms cozy with the updated fit of the all-new Women's ELITE Thermal Arm Warmer. The dialed-in design of these women's-specific warmers are designed to fit smaller, shorter arms, eliminating any droop or gap to your jersey or gloves. The fleecy fabric offers welcome warmth without added bulk, and reflective elements enhance your safety on the road. Please consult the Women's-specific arm warmer size chart as your size will be different than in the unisex arm warmer sizing. - ELITE Thermal Fleece panels provides superior warmth, stretch, and recovery - Women's-specific fit—please consult women's arm warmers size chart, not the unisex warmers chart - Plush, wide elastic binding with silicone gripper for a stay-up fit - Anatomic left and right arm-specific fit - Reflective elements for low-light visibility - 56% nylon 30% polyester 14% elastane - Imported

Lightweight thermal hat to use underneath a helmet during cold days and intense rides. - Wind and water repellent fabric - Raw-cut edge for great feel - Excellent moisture transport

- Slim fit face protector - Soft, lightweight feeling at the top - Excellent moisture transportation - Flatlock seams Fabric: 100% Polyester

58% Merino Wool, 35% Nylon, 7% Lycra The original DeFeet shoe cover is designed to be worn over road cycling shoes with cleat systems, providing an extra barrier against windchill and dirt. A three-season product for cool to cold conditions in damp or dry weather, the Slipstream Strada features pre-opened cleat zones and heel tabs. Features an embossed DeFeet logo infused with glass beads for nighttime reflectivity. Available in charcoal grey.

A little thicker than a traditional headband, yet small enough to still fit under your helmet comfortably, this Wind Headband is the perfectly balanced accessory to provide a little extra warmth for your ears and head during the winter. Ear and forehead coverage keeps you from being uncomfortable while riding but still lets heat escape out of the top of your head to prevent overheating.

- Warm Up And Recover Faster - Enhances Exercise Efficiency By Stabilizing Lower Leg Muscles - Improves Circulation And Delays Fatigue - Comfortable Seamless Design - Quick Drying - UPF Sun Protection

- 3D construction for better movement - Elastic gripper at the top - 6-inch YKK zipper - ThermTextura fabric: ThermTextura fabric incorporates all the benefits of TransTextura fabric by transferring body moisture from inside while insulating you from the cold air outside.

Pearl Izumi's lightweight and cool Sun Sleeves provide superior UPF 50+ protection from ultraviolet rays and boast a lighter feel that allows using them in even warmer temperatures. They also have wider grippers for more comfort and that ensure they stay up when you are charging hard. • In–R–Cool technology optimizes skin–cooling effect and moisture management • Black colorway features ELITE Transfer fabric with In–R–Cool powered by Coldblack technology for optimal cooling and UPF 50+ sun protection by reflecting UV rays • White colorway features ELITE Transfer fabric with UPF 50+ Sun Protection and Ice-fil • Reflective elements for visibility

When your rides start at sunrise and go until sunset, you'll need something to shield your eyes. The four-panel Gravel Kit Cap features a perfectly-sized brim that keeps your vision shaded but doesn't obstruct your view of the road ahead. - Four-panel construction - Made by Pace Sportswear

A proper cycling cap keeps your eyes glare- and moisture-free. This one is designed to do just that, with a carefully measured amount of panache woven in. - Four-panel design - Matches Salsa Latitude jerseys, bib short, vest, gloves, socks, and bottles