Packs/Racks/Baskets

B-RAD, which stands for Bottle Relocation and Accessory Device, is a system for organizing on-bike accessory storage using bottle cage mounts. Used alone to shift bottle cage location for clearance, or combine with other B-RAD accessories to carry tools, tubes pumps or a 2nd bottle on downtubes. - Single bottle mount with two slotted holes for adjustments up to 4mm +/- 10mm - Designed to maximize bottle capacity on small frame bikes and dual suspension frames

B-RAD, which stands for Bottle Relocation and Accessory Device, is a system for organizing on-bike accessory storage using bottle cage mounts. Used alone to shift bottle cage location for clearance, or combine with other B-RAD accessories to carry tools, tubes pumps or a 2nd bottle on downtubes. - Long, four-slotted mount allows two, smaller bottles to be mounted in-line - Compatible with triple bottle mounts on forks or frames, use included neoprene pad and zip tie for use with standard bottle cage mounts

The B-RAD Accessory Strap Mount is designed to add an additional strap point for tire levers, tubes or CO2 cartridges. Mounts to bottle bosses, or to the B-RAD base for additional carrying options. - Mounts to bottle bosses, or to the B-Rad base for additional carrying options - Main strap is 50mm wide and holds loads 75-120mm diameter (3 - 4.75 inches) - Cradle strap is 40mm wide and 350mm long for supporting loads

B-RAD Bottle Mounts allow for cargo customization and cargo optimization. They are designed to work in tandem with B-RAD Base mounts to keep cargo on the bike and off the back. - Compatible with any bike frame that has 2 standard 64mm spacing bottle cage mounts (most modern frames) - 6061-T6 aluminum brackets, stainless hardware - Weight (no hardware) – 20g - Maximum load 1700g - Designed to carry two bottles or accessories off of one B-RAD base

BarBag is designed to let you take your adventure farther.  Providing easy to access on-the-bike storage, it allows for one handed opening and closing on the go. Its Magnetic MagCro latch keeps things closed no matter the riding conditions and its design does not interfere with standing and pedaling. - Secure and easily accessible on the bike nutrition/phone/wallet/tool storage - Clear lid with automatic MagCro(TM) latch allows riders to easily access contents even in the roughest of conditions - Exact shaping to fit on the side of the stem while allowing standing pedaling without knee interference - Dimensions (trapezoidal shape):16cm x 7 cm x 5 cm and 7 cm deep (0.6 liter capacity) - GPS/Bike Computer bumper provided for spacing the bag away from the stem

Topeak's MTX TrunkBag DX boasts an expandable main compartment to carry all the gear you need. It's built to last with rigid molded panels mated to 600-denier nylon. And, it's packed with handy features, such as a shoulder strap, carrying handle, taillight clip and top elastic straps. There are even reflective strips for safety. Plus, Topeak's ingenious MTX System makes it a snap to attach it to your Topeak MTX QuickTrack rack (sold separately). - Capacity 12.3 L / 750 ci - Compartments 1 Divided main compartmetn, two side zippered pockets, Multi-expanding top compartment - Added Features: Water bottle holder Shoulder strap Carrying handle Elastic top bungees 3M reflective strip Safety light clip Optional rain cover - Size (L x W x H): 36 x 25 x 21.5-29 cm / 14.2” x 9.8” x 8.5”~11.4” - Weight: 985 g / 2.17 lb

Topeak's MTX TrunkBag DXP boasts a pop-up main compartment and expandable side panniers so it's capable of carrying plenty of gear. Plus it's built to last with rigid molded panels mated to 600-denier nylon. And, it's packed with handy features, such as a shoulder strap, carrying handle, bottle holder, taillight clip and top elastic straps. There are even reflective strips for safety. And, Topeak's ingenious MTX System makes it a snap to attach it to your Topeak MTX QuickTrack rack (sold separately).

Topeak's Smartphone DryBags are a great way to keep your smartphone handy for communication or to use as a GPS during longer rides. This pack features a foam body for protection from bumps and a clear touchscreen-compatible window for viewing your phone's display.

- The perfect quick-mount rear rack system attaches to road, cross, hybrid or touring bike seatstays. This one-size-fits-all front rack features an innovative top plate that adjusts to level independent the seatstay angle. Integrated QuickTrack system allows Topeak TrunkBags to slide and lock into place and release with a the push of a button. Innovative hook and loop strap mounting system cinches down tight to keep the load stable and allow mounting on a wide range of bikes. Also compatible with KLICKfix / RackTime Snapit or Vario system bags.

Topeak's MTX TrunkBag DXP boasts a pop-up main compartment and expandable side panniers so it's capable of carrying plenty of gear. Plus it's built to last with rigid molded panels mated to 600-denier nylon. And, it's packed with handy features, such as a shoulder strap, carrying handle, bottle holder, taillight clip and top elastic straps. There are even reflective strips for safety. And, Topeak's Velcro straps make it a snap to attach to your rear rack (sold separately).

Take your bike adventures even further with a versatile mount cage to pack larger gear on your bike. The included tie-down straps provide the ability to carry a DryBag, sleeping bag/pad, stuff sack, or any round shaped gear on your bike frame or fork with bottle bosses. A four-hole mount design offers height adjustment of your load for better balance. VersaMount clamps also provide easy installation and flexible mounting options. - Fits tubes 20-60mm. - Engineering grade polymer - 64 mm mounting height adjustable - Weight: 128g - Max load: 3kg / 6.61lb - Dimensions: 22 x 12 x 7cm / 8.7 x 4.7 x 2.8-inches

The Salsa EXP Series Anything Cage Bag is designed to hold your gear on the Salsa Anything Cage and Anything Cage HD mounting systems. This bag protects contents from the elements while keeping weight low to the ground. - Designed to fit Salsa Anything Cage and Anything Cage HD (sold separately) - Quick-release roll-top closure for easy accessibility - Two Hypalon daisy chains for multiple secure attachment points - Molded TPU base helps keep bag upright even when off the bike - Primary Material: 400D Nylon with TPU Base - Weight: 128g

The Salsa EXP Series Anything Cage HD is a unique cargo mounting system that allows you to carry lightweight gear or large bottles on forks and down tubes that have Three-Pack mounts. - Versatile system designed for the Salsa Anything Cage Bag with EXP Series Rubber Straps (included) or nylon EXP Series Anything Cradle Straps - Constructed with glass-filled nylon for strength and durability - Holds gear low on fork blades or down tubes with Three-Pack mounts - Includes Anything Cage HD with hardware and two 20" Salsa EXP Rubber Straps - Maximum load: 6.6 lb (3kg)

The Salsa EXP Series Anything Cradle is a bracket-mount handlebar roll system that holds gear in front of your handlebars without kinking your cables. This modular system is designed for use with our EXP Series Side-Load or Top-Load Dry Bags, or you can use your own dry bag. The Anything Cradle allows you to distribute your gear evenly, which is essential to any well-balanced bikepacking setup. - Includes Anything Cradle and two 30" Salsa EXP Series Rubber Straps - Salsa EXP Series Rubber Straps are made of non-slip TPU to hold gear securely - Anything Cradle Arms are compatible with 35.0mm handlebars or 31.8mm handlebars (with included shim) - Nylon 6/6 composite cradle, 6061 forged aluminum arms - Maximum load weight: 8 lbs. (3.6kg)

The EXP Series Direct Mount Thumb Screws allow for quick and easy attachment of Salsa EXP Series Direct Mount Packs to bicycle frames equipped with direct-mount locations. - Can be installed and removed by hand or with allen key - Includes necessary 0.5 mm washers and 4 mm spacers - Sold in packages of two

The EXP Series Top Tube Bag provides easy access to food and gear on quick rides or bikepacking adventures. It bolts directly to Salsa frames equipped with top tube mounts or attaches to nearly any bicycle with the included hook-and-loop strap. - Waterproof fabric, water-repellent zipper, and welded construction keep contents dry - Closed-cell foam internal structure provides rigidity - Cord port for batteries and charging - Length: 190mm - Width: 30mm top, 50mm at base - Height: 80mm at front, tapering to 55mm - Total volume: 65.4 cubic inches

The Salsa EXP Series Rubber Strap is a strong, adjustable strap that holds your gear securely to Salsa Anything Cages, Anything Cradles, or racks. Use them anywhere you need to secure a load on your bike. - UV- and weather-resistant - Includes band to keep excess strap out of the way - 22" length is best for use with Salsa Anything Cage and Anything Cage HD - 30" length is best for use with Salsa Anything Cradle - Sold in pairs

The Salsa EXP Series Top-Load Dry Bag is tailored to fit our Anything Cradle, attached via a pair of our EXP Series Rubber Straps. The bag holds all of your bikepacking essentials and opens from the top to keep a fixed width for easy on-the-bike loading. Fully welded construction, maximum versatility, and hook-and-loop points for ease of attachment make this supremely useful dry bag a key part of any bikepacking setup. - Air purge valve for compression - Roll-top bag opens at top and is fixed-width for easy loading when mounted on the bike - Slots and hook-and-loop simplify bag installation - Strap slots help keep bag from moving side to side when installed - Welded design with waterproof materials

The Mag-Tank takes a new twist on top tube bags. Instead of a zippered opening, access to the bag is by a smartly contoured top flap held in place by a magnetic buckle with mechanical engagement (read - the magnet aids in closure, while load is placed on a connection). It will not unintentionally open and spill your gummy bears when you end up in the trees with your bike upside down like a conventional magnetic closure would. You can easily open the bag one handed by pulling outward on the cord loop and you have access to the whole top of the bag. To close, just flick the flap down and the buckle self-engages! The Mag-Tank is just a hair smaller than Revelate's Gas Tank to prevent leg movement from hitting the edge of the flap opening. Please note - while the cover to this bag is designed to shed rain and spray, due to the large panel opening it is not a sealed bag or waterproof bag. Features: - One-handed access while riding - Side panels stiffened with HDPE plastic sheets - Wrap around panel is padded with closed-cell foam - Interior lined with yellow fabric for greater visibility - Adjustable height daisy chain front attachment with a spacer block to clear stem clamp bolts - Beefy top tube strap has gripper material with double back wrap for bomber stability - Made in the USA with domestic and imported materials. Sizing: - Length: 8.5" - Max height: 5" - Width at stem: 2.5" - Tapers down to 2.5" tall and 1.5" wide along the top tube Specifications: - Weight: 4.5 oz. - Volume: Approximately 65 cubic inches - Materials: VX21 & 42 XPac, 420-denier yellow and red lining, closed-cell foam-padded tube sections, HDPE sheets

- Hip pack holds water nutrition tools spare tubes etc and is ideal for longer rides - Main pocket folds out to make a tool bench for trailside repairs - Padded water resistant cell phone pocket plus side pockets

When you're out for an all-day ride—or when your ride unexpectedly turns into an all-dayer—you need a pack that carries everything without weighing you down. The women's-specific Raven 10 is stable, comfortable, and specifically designed with mountain bike challenges in mind. You want a pack that doesn't bounce all over the place, and so do we. So, we made one. The shoulder straps on this pack are shaped like wings and naturally curve when you resume your natural riding position. An AirScape suspension system and backpanel keep your bag close to your body while allowing for dynamic body movement and unmatched comfort and ventilation. An integrated 2.5-liter reservoir keeps you hydrated, and a dedicated compartment at the bottom of the pack holds a Tool Roll that conveniently stores everything from mini-pumps to tire levers and more. TOOL ROLL - Never dig for your tools again. The dedicated lower compartment holds a removable pouch to organize your tools so you can get back to what matters—the ride. RESERVOIR INCLUDED - Osprey Hydraulics LT 2.5L reservoir keeps you hydrated all day long and stores in a dedicated hydration compartment with direct-zip access and sternum strap magnetic bite valve. LIDLOCK - Attach your helmet securely to the outside of your pack without wasting the space inside. Perfect for wrapping up a long ride at your local brewery. RIDE STABILITY - Our new "winged" harness wraps the upper shoulders for added stability and keeps the pack comfortably close to your body. FEATURES - Women's-specific fit and sizing - Countouring AirScape backpanel and bike-specific shape harness - Included Osprey Hydraulics LT 2.5L reservoir by Hydrapak - Hydration sleeve with direct-zip access and hose path for easy loading - Lightweight sternum strap magnet for easy access to water - Scratch-free, heat-embossed zippered slash pocket - Stretch mesh zippered hipbelt pockets - LidLock bike helmet attachment - Stretch mesh front pocket for quickly stashing extra gear - Blinker light attachment and reflective patch for safety - Removable roll-up tool pouch keeps tools handy and organized Bike tool organization in main compartment AIRSCAPE SUSPENSION - Atilon foam framesheet allows dynamic body movement and distributes load across entire backpanel AIRSCAPE BACKPANEL - Mesh-covered, extra deep ridged foam allows maximum ventilation while keeping the load close to the body BIOSTRETCH HARNESS - Osprey engineered bike-specific harness with winged shoulder strap shape contours the shoulder providing superior comfort and stability - Soft breathable spacermesh contact surfaces and die-cut foam ventilation HIPBELT - Airmesh wrap hipbelt with zippered pockets provide stability and breathability

Ideal for multiday tours and self-supported races, the ORTLIEB Gravel-Pack duo offers you a combined payload of 25 liters for additional gear such as mess kits, food, and other "luxury" items. Mounting the Pack to your lowrider bike rack allows you to maintain a low center of gravity and undiminished off-road agility despite your extra gear. While the Pack's streamlined design – without inside pockets and a shoulder-strap pad – helps to keep it in the featherweight class, its lightweight, wear-resistant material withstands even the harshest of rock and gravel conditions you encounter on your way. And, no matter how wet the weather, your things will stay dry thanks to the proven ORTLIEB-waterproof quality and roll closure. With the QL2.1 system and two mounting hooks, the Gravel-Pack remains tightly attached to your bike rack while you ride over hill and dale on your gravel grinder, mountain bike or fatbike.

NEW: MOUNT NOT INCLUDED From January onward you must choose the handlebar mount that is right for your bike. Made of durable and waterproof polyester fabric, the ORTLIEB Ultimate Six Classic is a compact handlebar bag that plays a key role in the gear management plan of all bike touring enthusiasts. Depending on the model, the Ultimate Six Classic offers a 5.7 or 8.5-liter payload and ample space for your valuables and the things you want to have at the ready on your tour. The transparent and rainproof flap compartment that comes with the five-liter model offers 21 x 12 cm interior space for the convenient storage of smartphones, GPS devices and maps. And you can naturally operate your touchscreen device through the transparent cover. The two larger models enable the use of different inserts in case you want to securely stow any special gear such as your high-performance camera while you're underway. All of the handlebar bags come with a detachable shoulder strap, a reflector, and a zippered inside pocket. All Ultimate Six models are compatible with all ORTLIEB mounting sets, as well as Rixen & Kaul Klickfix mounting systems. An extensive range of accessories is also available for all of our handlebar bags. - Reflector made of high luminosity 3M Scotchlite material on front of bag - Small reflector made of black reflective film on base of the mounting unit - Maximum payload: 5 kg - Accommodates the attachment of a map case and Safe-it in sizes S to XL (all models from 2017) - Zippered inside pocket with carabiner for keychains

Whether you're heading to the beach, riding to the grocery store, or just cruisin' around, Nantucket's Cisco Pannier Basket will get you and all your goodies there in style. This beautiful rattan basket boasts high-quality wicker construction and a rolled rim for extra durability. Plus, it attaches to most rear racks (sold separately) with a pair of easy-to-use metal hooks and includes a carry handle for portability. - Dimensions: 13" (L) x 9.5" (W) x 13" (H) - Maximum Weight Limit: 15 pounds or rear rack limit

Lightship baskets are made from finely woven rattan cane, the outer skin of the natural rattan vine. These baskets are replicas of the Nantucket Lightship baskets first produced in Nantucket during the whaling era of the 1800s. Attaches to front handlebars with two leather straps. - Dimensions: 12" (L) x 7.5" (W) x 9" (H) - Maximum Weight Limit: 13 pounds

Lightship baskets are made from finely woven rattan cane, the outer skin of the natural rattan vine. These baskets are replicas of the Nantucket Lightship baskets first produced in Nantucket during the whaling era of the 1800s. Attaches to front handlebars with two leather straps. - Dimensions: 14" (L) x 10" (W) x 8.5" (H) - Maximum Weight Limit: 13 pounds

These easy-to-use pannier baskets attach to your existing rear rack with two metal hooks and feature a carrying handle, making them perfect for a trip to the farmers market. Tuckernuck baskets are made from the highest quality natural rattan fibers. Woven from kubu rattan, the extra thick full-core weave of this basket makes it one of the most durable bicycle baskets on the market. - Dimensions: 13" (L) x 9.5" (W) x 13" (H) - Maximum Weight Limit: 15 pounds or rear rack limit - Sold individually

The High Roller is a super-durable and sleek bike pannier, made from upcycled bicycle inner tubes and recycled fabric, that serves as a backpack off the bike. With its stormproof construction and striking good looks, it keeps the elements at bay while you ride. The quick mount system secures to virtually any rack system. Features: - Stormproof roll top closure - Weather resistant sewing - Reflective webbing light loops - Adjustable to fit most racks - Compression strap - Backpack straps - Built in Colorado - Dimensions: 14 L x 20 H x 6 D in. - Weight: 2 lb. 14.5 oz.

- Soft non-slip webbing material - Triple strap strength to hold down cargo - Double vinyl hooks for secure mounting - 24-inch length works with most racks

For the kids, or just the kid in you. Store almost anything in these easy-to-attach handlebar bags, from their juice box to your keys. Unique designs add flare to any ride. Instant bike rack cred. - Handlebar mounted with Velcro straps - Reflective elements