Accessories

Park's AV-1 Axle Vise makes repairing and overhauling hubs easier than ever. It prevents your axle from spinning while work is done on the hub and it has two different size receptacles so it will work with both front and rear axles.

HG, Needle Applicator, Chain lube,18 ga

- For use with majority of Hex bolts found on a bicycle - 4, 5, 6mm Hex

For riders who are carrying their bike over the tailgate of a truck. Even with a tailgate pad, which is designed to protect the vehicle and not the bike, damage will occur on the downtube when shuttling without protection. The Shuttle Armor is designed to protect the downtube during transport on the roughest access roads. RideWrap protection accessories are made with high-quality RideWrap materials that are bike-tested for long-term durability. All RideWrap protection accessories have been designed to give riders leading protection for their dollar. - Matte black finish - Fits all makes, models, and sizes - Protects from harsh tailgate rub - Designed around mountain bike geometry - Kit includes instructions and pre-install cleaning wipe

The B-RAD Accessory Strap Mount is designed to add an additional strap point for tire levers, tubes or CO2 cartridges. Mounts to bottle bosses, or to the B-RAD base for additional carrying options. - Mounts to bottle bosses, or to the B-Rad base for additional carrying options - Main strap is 50mm wide and holds loads 75-120mm diameter (3 - 4.75 inches) - Cradle strap is 40mm wide and 350mm long for supporting loads

The Steel Hitch provides the critical connection from your Burley Trailer to your bicycle. The hitch installs easily on the rear skewer of your bike, and then stays attached so the Burley can be connected at any time. If you’d like to swap the Burley from bike to bike, pick up a couple spare hitches and install them on the extra bikes so the hitch doesn’t need to be un-installed when swapping bikes.

The Dayblazer 550's high-power BLITZ daytime running mode and side visibility to grab the attention of cars or light your way through a dark section of the commute. The Grid Rear Light has a wide COB light array and a long run time. Ready for those commuting in the city, riding the open roads, or heading to their local trail. The Dayblazer 550 and Grid Rear Light Set offers plenty of rechargeable power to keep you visible while out riding and well-powered to be seen. - USB-C-Modern USB plug standard to ensure you can stay charged and ready to ride - BATTERY GAUGE-Small color LEDs in the power button help you monitor your light battery power, to tel you when it's time to charge your light once more. Green = 100-50%, Orange = 50-25%, Red = 25-0% - MEETS ANSI FL-1 STANDARD-This standard was created by the American National Standards Institute (ANSI) to provide consistent performance measurements for handheld lights. - LIMITED LIFETIME WARRANTY - Restrictions and conditions apply.

Timeless designs with a loud, clear tone, undoubtedly some of the finest bells available. - Spring-loaded lever arm strike mechanism - Standard domes are 55mm wide and Mini domes are 45mm - Steel band clamps fits bars 22.2 to 26.0mm - Made in Japan

The future of cycling taillights is here. Vya is a game-changing design, blending powerful output with revolutionary smart features. The piercing 50 lumen output is easily visible over a distance of 1km, even in bright daylight. What separates Vya from traditional taillights are smart auto-on/off sensors – start riding and the light turns on automatically and will shut itself off after the ride, with a delay built in for stoplights. The scientifically designed SafePulse beam pattern not only gets noticed from motorists, but allows the driver to accurately judge distance from the rider and their direction of travel – a safety feature not possible with strobing lights. Attaching Vya is effortless with a simple clockwise 1/4 turn into the mount locking the light in place and activating the auto-on feature. When it comes time to recharge, remove Vya from the mount in seconds and insert the integrated USB paddle directly into a computer or USB power outlet – no cables keeps recharging simple and convenient. The next evolution in bike safety, Vya takes powerful safety lighting and keeps the rider safe so they can focus on the road ahead. Features - 50 Lumen Output certified to the FL-1 Standard with high powered premium CREE LED - Smart sensor technology senses motion and automatically turns Vya on when inserted into mount and will remain on, even when a rider pauses at stoplights - Auto-off when bike is parked or light is removed from mount to prevent the dreaded ‘dead bike light’ when it comes time for the next ride - SafePulse beam pattern scientifically designed to enhance a passing driver’s ability to judge the cyclist’s distance and direction of travel without the risks associated with flashing lights - Beam pattern optimized to give a wide red swath of light that can be seen clearly from the rear and side ideal for city riding - An impressive 8 hour runtime allows Vya to be used on multiple rides before needing a recharge, low battery status is indicated by rapidly flashing sidelights - Ultra-compact mount with durable rubber strap designed to be compatible with various size seat posts and can even be attached to seat stays - USB Mount Receptor allows light to be securely mounted or removed from bike in seconds with a simple, secure 1/4 turn lock; light will not turn on when removed from mount - Direct USB charging without cables fully charges in 2 hours - Made with bio-renewable material waterproof to 1 meter (when inserted in mount) for all-conditions reliability (IP67 Rated) Specifications - Lumens: 50 (SafePulse) - Runtime: 480 min (SafePulse) - Beam Angle: 30° (flood) - Charge Time: 120 min

Mirrycle's Incredibell Spring Bell offers a traditional Asian-style bell that integrates into the top cap of the headset to free up valuable handlebar space. The bell can be mounted any way you choose on the headset, and the dinger is adjustable as well. A flick of your finger and the Spring Bell rings loud and clear for all to hear. - Dome Diameter: 45mm (1.8") - Weight: Black and Silver: 26g (.9oz), Brass: 57g (2oz)

The EXP Series Top Tube Bag provides easy access to food and gear on quick rides or bikepacking adventures. It bolts directly to Salsa frames equipped with top tube mounts or attaches to nearly any bicycle with the included hook-and-loop strap. - Waterproof fabric, water-repellent zipper, and welded construction keep contents dry - Closed-cell foam internal structure provides rigidity - Cord port for batteries and charging - Length: 190mm - Width: 30mm top, 50mm at base - Height: 80mm at front, tapering to 55mm - Total volume: 65.4 cubic inches

Portland Design Works has given the original fat bike front fender a facelift! The Mud Shovel 6.5 Front Fender was designed specifically for fat bikes - they're extra long and wide to block the muck, snow, or sand you'll ride through on your next fat bike adventure. Made of heavy-duty polymer, the Mud Shovel 6.5 Front Fender is super lightweight but sturdy enough to take years of bad weather abuse. The fender mounts to the downtube of your bike using adjustable rubber straps for a secure fit. - Front fender is 254mm wide and 622mm long (10" x 24.5") - Extra-long, wide design blocks snow, water and sand - Bracket keeps fender super stable and is easy to install - Built with lightweight, sturdy materials for durability

Buzzy's Pollinator Travel Shock pump's compact size and removable 300 psi gauge make it is the perfect choice for mechanics on the go.

The Bite Valve Cover keeps your reservoir bite valve free from dirt and dust on the trail.

The Tubi is sized for tubular or "sew-up" tires. The Tubi has a side pocket if you prefer to separate your money, I.D. or keys. It's skinny, so as not to touch you or your expensive Euro shorts. - 45 cubic in.

The Banjo Brothers' Grocery Bag Pannier is sized to perfectly accommodate a standard grocery bag. It attaches to any standard rear rack (sold separately) and folds flat when not in use. It's equipped with a strong steel frame and a rigid polymer liner. The front and side panels are ripstop with ballistic fabric in high-wear areas. It also includes a shoulder strap and a quick-release mount. So ride to the store, take your pannier inside, fill it with groceries, and reattach it to your rack. Shopping = done.

CNC machined aluminum dispenser with brass internals. Trigger Valve Operation for easy and controlled inflation. Twin Chuck head threads on to Presta and Schrader valves. Neoprene sleeve insulates hand from cold during discharge. Compatible with threaded CO2 cartridges. Includes one 16g cartridge. - Weight: 26g - Aluminum, a strong, lightweight, and durable material, is used to make various precision CO2 inflator components - CNC machined aluminum parts for precise and durable construction - Press on/off valve operation functions like a trigger, providing easy and precise inflation - Lezyne's ABS Flex Hose threads directly onto the valve for a secure, airtight connection. Compatible with Presta, and Schrader valves

Topeak's Modula EX is a sleek, adjustable bottle cage that securely carries a wide range of bottles.

- UV stabilized stretch polyurethane strap - Securely fastens spare tube or gear to your frame - Won't absorb water and mud like a Velcro strap and won't scratch your frame

This item contains 10 replacement plugs for the Blackburn Plugger Tubeless tool (sold separately), a one-shot tire plugging system for tubeless tires. It deploys in seconds to give a permanent fix for your flat.

4.2mm stainless steel tubing bent in the same graceful curves as our original model. The mounting spine is a stamped piece of art. This is not a standard metal cage. The finished cage is polished to a brilliant shine and will add to the aesthetics of any machine. Stainless cages are a popular choice for steel frames, randonneurs, and gravel bikes. It is also well-proven at the top levels of competitive cycling. It's adorned the winner's bike at Paris Roubaix and carried bottles securely in Flanders, the Tour de France, etc. - Weight: 53 grams

The Uno is small, with only enough space for a road inner tube plus gas and maybe a couple of Allen wrenches. It also fits under the saddle nicely when cinched tight. It rides horizontally while our other bags hang vertically. - 16 cubic in.

The Bee enables family bike adventures on a budget without sacrificing safety and durability. This lightweight, bike-only trailer features comfortable seating for one or two children, tinted windows and plenty of space for cargo. Share your love for the outdoors with your little ones in the Burley Bee. - Compact fold flattens the trailer for easy storage and transportation - 20” push button wheels for quick removal - Tinted side windows

- 1.5-liter bladder included - 2 nutrition compartments for bars or 150 ml liquid/gel (each) - 2 chest pockets for gear you need to have quick access to while riding - Material: N210 D Taffeta, 3D Air Mesh, Airo Flex - Volume: 1.5L - Size: 23 x 33 x 2cm (9.1 x 13 x 0.7") - Weight: 230g (0.5lbs)

- Clamp-on mirror made from high-impact, heavy-duty nylon fiber composite - High-quality glass with anti-glare properties provides an extremely clear image - Adjustable head allows fine-tuning of the view angle

Together with tough materials, an internal pocket, and Blackburn's built-in reflectivity, the Grid Small is perfect for road cyclists. The Grid Small is big enough to fit a road tube, a multi-tool, 2 tire levers, and a CO2 inflator w/cartridge. - Tail Light Loop - Water Resistant Zippers - Retro Reflective Material - Robust, Abrasion-Resistant Outer - .45 Liter capacity - Weight: 55g

Blackburn's biggest seat bag is built to bring it all with you. The Grid Large is spec'd with tough materials, an internal pocket/removeable divider, and is covered with reflective technology. Big enough to fit a jacket or 3 road tubes, a multi-tool, 2 tire levers and a CO2 inflator with a cartridge. A removable divider allows for easy organization. - Reflective material - Padded structure keeps its shape - Coated zipper, tail light loop, internal pocket - 48oz/1.4L/85cu in capacity - Weight: 130g

- Stiff nylon bristles and perfect size for blasting through dirt caught on wheels and cassettes

The dimensionally stable Goose Lock chain lock features a unique housing design, soft-touch coating and specially hardened steel. For the good feeling of security and a special feel. With the Goose Lock, ABUS has developed a dimensionally stable bike lock that is also highly appealing to the eye and to the touch and features impressive colouring and design technology. It is made up of several components: the classic 6-millimetre steel chain, the gooseneck, the foam cover and a coating made of plastic fibres. The steel chain – like the housing and structural parts of the locking mechanism – is manufactured from specially hardened steel. The term "gooseneck" refers to two metal spiral springs wound together that ensure the dimensional stability of the lock. This allows the lock to be bent into the desired shape and wrapped tightly around the bicycle frame. The foam ensures the unmistakable feel of the lock and rattle-free transport. Excellent protection against abrasion and scratches is provided by the durable, highly flexible coating made of plastic fibres. Thanks to the dimensional stability and the foam, it is very easy to transport the lock. It does not rattle on the bike frame, yet still remains flexible. It is available in different colours - for an individual colour statement to match any bike. - 6mm chain with functional, durable and highly flexible textile fibre sheathing - The chain, housing and structural parts of the locking mechanism are made of hardened steel - Won't rattle in transport thanks to dimensional stability

The Lucky Cat Cage is made from a single sheet of lightweight 5052 alloy. Cut in the shape of a Maneki-neko (Japanese for "beckoning cat"), this Portland Design Works bottle cage will undoubtedly bring good luck to its owner. Its side loading design makes it a great fit on small bike frames.